background image

ASUS CUV4X-M User’s Manual

57

4. BIOS SETUP

4. BIOS SETUP

Advanced Menu

System/SDRAM Frequency Ratio [1/1]

This field determines whether the memory clock frequency is set to be in
synchronous or asynchronous mode with respect to the System/PCI Fre-
quency
. The options displayed in the popup menu vary according to the
System/PCI Frequency (MHz).

CPU Vcore

This field displays the core voltage supplied to
the CPU. If you want to set it manually, always
refer to the CPU documentation. The pictures
shown here provide only examples of possible
Vcore ranges.

CPU Level 1 Cache, CPU Level 2 Cache [Enabled]

These fields allow you to choose from the default of [Enabled] or choose
[Disabled] to turn on or off the CPU’s Level 1 and Level 2 built-in cache.
Configuration options: [Disabled] [Enabled]

CPU Level 2 Cache ECC Check [Disabled]

This function controls the ECC capability in the CPU level 2 cache. Con-
figuration options: [Disabled] [Enabled]

Processor Serial Number [Disabled]

The Processor Serial Number is a unique number that is added to every
Pentium III processor to help verify the identity of the user across the Internet.
Set this field to [Enabled] when you need increased security for doing busi-
ness online or e-commerce. Otherwise, leave it to its default setting of [Dis-
abled] for greater anonymity when surfing the Internet. NOTE: This field
is available only when a Pentium III processor is installed in your system.

BIOS Update [Enabled]

This functions as an update loader integrated into the BIOS to supply the
processor with the required data. In the default position of [Enabled], the
BIOS will load the update on all processors during system bootup. Configu-
ration options: [Disabled] [Enabled]

PS/2 Mouse Function Control [Auto]

The default of [Auto] allows the system to detect a PS/2 mouse on startup.
If detected, IRQ12 will be used for the PS/2 mouse. IRQ12 will be reserved
for expansion cards only if a PS/2 mouse is not detected. [Enabled]  will
always reserve IRQ12, whether on startup a PS/2 mouse is detected or not.
Configuration options: [Enabled] [Auto]

Using Coppermine
processors

Using Katmai
processors

Содержание CUV4X-M









































































































Отзывы: