manualshive.com logo in svg

Asus CUSL2, Руководство пользователя

Поделиться
Скачать
Asus CUSL2 Скачать руководство пользователя страница 39

ASUS CUSL2-M User’s Manual

39

3. HARDWARE SETUP

 Connectors

3. H/W SETUP

21) Wake-On-LAN Connector (3-pin WOL_CON)

This connector connects to a LAN card with a Wake-On-LAN output, such as
the ASUS PCI-L101 Ethernet card (see 7. Appendix). The connector powers up
the system when a wakeup packet or signal is received through the LAN card.

IMPORTANT:

 This feature requires that Wake On LAN or PCI Modem is

enabled (see 4.5.1 Power Up Control) and that your system has an ATX power
supply with at least 720mA +5V standby power.

CUSL2-M

®

CUSL2-M Wake-On-LAN Connector

IMPORTANT: Requires an ATX power
supply with at least 720mA +5 volt
standby power

+5 Volt Standby PME

Ground

WOL_CON

22) Wake-On-Ring Connector (2-pin WOR)

This connector connects to internal modem cards with a Wake-On-Ring output.
The connector powers up the system when a ringup packet or signal is received
through the internal modem card. NOTE: For external modems, Wake-On-Ring
is detected through the COM port.

IMPORTANT:

 This feature requires that Wake On LAN or PCI Modem is

enabled (see 4.5.1 Power Up Control) and that your system has an ATX power
supply with at least 720mA +5V standby power.

CUSL2-M

®

CUSL2-M Wake-On-Ring Connector

WOR

Ring#

Ground

2

1

Содержание CUSL2

































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды