background image

3 - 4

3 - 4

3 - 4

3 - 4

3 - 4

C h a p t e r   3 :   S t a r t i n g   u p

C h a p t e r   3 :   S t a r t i n g   u p

C h a p t e r   3 :   S t a r t i n g   u p

C h a p t e r   3 :   S t a r t i n g   u p

C h a p t e r   3 :   S t a r t i n g   u p

3.3.2

3.3.2

3.3.2

3.3.2

3.3.2

Utilities menu

Utilities menu

Utilities menu

Utilities menu

Utilities menu

The Utilities menu shows the applications and other software that the
motherboard supports.

Realtek Audio Driver

Realtek Audio Driver

Realtek Audio Driver

Realtek Audio Driver

Realtek Audio Driver

Executes the wizard to install the Realtek

®

 ALC861 audio driver and

application. When the phone jacks of the High Definition Audio panel are
configured as output, use the master volume to adjust the sound.

Intel(R) PRO/100 and PRO/1000 Adapters Driver

Intel(R) PRO/100 and PRO/1000 Adapters Driver

Intel(R) PRO/100 and PRO/1000 Adapters Driver

Intel(R) PRO/100 and PRO/1000 Adapters Driver

Intel(R) PRO/100 and PRO/1000 Adapters Driver

Installs the Intel

®

 PRO/100 and PRO/1000 Adapters Driver.

Intel (R) Graphics Accelerator Driver

Intel (R) Graphics Accelerator Driver

Intel (R) Graphics Accelerator Driver

Intel (R) Graphics Accelerator Driver

Intel (R) Graphics Accelerator Driver

Installs the Intel

®

 Graphics Accelerator Driver.

USB 2.0 Driver

USB 2.0 Driver

USB 2.0 Driver

USB 2.0 Driver

USB 2.0 Driver

Installs the USB 2.0 driver.

ASUS PC Probe

ASUS PC Probe

ASUS PC Probe

ASUS PC Probe

ASUS PC Probe

This smart utility monitors the fan speed, CPU temperature, and system
voltages, and alerts you of any detected problems. This utility helps you
keep your computer in healthy operating condition.

Содержание Barebone Vintage-PH1



































































































Отзывы: