Asus B150-PLUS D3, Руководство пользователя

Страница: 26 / 56

1-16 Chapter 1: Product introduction
When using hot-plug and NCQ, set the SATA Mode Selection item in the BIOS to [AHCI].
See section SATA Configuration for details.
1.7.2 Internal connectors
1. Serial port connector (10-1 pin COM)
This connector is for a serial (COM) port. Connect the serial port module cable to this
connector, then install the module to a slot opening at the back of the system chassis.
The COM module is purchased separately.
2. Intel
®
B150 Serial ATA 6.0Gb/s connectors (7-pin SATA6G_1~6)
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0
Gb/s signal cables.
B150-PRO D3
B150-PLUS D3
B150-PRO D3/B150-PLUS D3 Serial port (COM) connector
PIN 1
COM
DCD TXD GND RTS
RI
RXD DTR DSR CTS
SATA6G_6
SATA6G_2
GND
RSATA_TXP4 RSATA_TXN4
GND
RSATA_RXN4 RSATA_RXP4
GND GND
RSATA_TXP3 RSATA_TXN3
GND
RSATA_RXN3 RSATA_RXP3
GND
GND
RSATA_TXP6 RSATA_TXN6
GND
RSATA_RXN6
RSATA_RXP6
GND
SATA6G_5
SATA6G_4
SATA6G_1
SATA6G_3
GND
RSATA_TXP1
RSATA_TXN1
GND
RSATA_RXN1
RSATA_RXP1
GND
GND
RSATA_TXP2
RSATA_TXN2
GND
RSATA_RXN2
RSATA_RXP2
GND
GND
RSATA_TXP5 RSATA_TXN5
GND
RSATA_RXN5
RSATA_RXP5
GND
B150-PRO D3
B150-PLUS D3
B150-PRO D3/B150-PLUS D3 Intel ® SATA 6.0Gb/s connectors
B A
A
B