Asus AS-D592, Руководство пользователя

Страница: 70 / 74

3-34 Chapter 3: BIOS setup
Hit ‘DEL’ Message Display [Enabled]
When set to Enabled, the system displays the message “Press DEL to run Setup”
during POST. Configuration options: [Disabled] [Enabled]
Interrupt 19 Capture [Disabled]
When set to [Enabled], this function allows the option ROMs to trap Interrupt 19.
Configuration options: [Disabled] [Enabled]
3.6.3 Security
The Security menu items allow you to change the system security settings. Select
an item then press <Enter> to display the configuration options.
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Security Settings
Supervisor Password : Not Installed
User Password : Not Installed
Change User Password
Password User Password
<Enter> to change
password.
<Enter> again to
disabled password.
If you forget your BIOS password, you can clear it by erasing the CMOS Real
Time Clock (RTC) RAM.
Change Supervisor Password
Select this item to set or change the supervisor password. The
Supervisor
Password item on top of the screen shows the default Not Installed . After you set
a password, this item shows Installed .
To set a Supervisor Password:
1. Select the
Change Supervisor Password
item and press
<Enter>
.
2. From the password box, type a password composed of at least six letters
and/or numbers, then press <Enter> .
3. Confirm the password when prompted.
The message “ Password Installed ” appears after you successfully set your
password.
To change the supervisor password, follow the same steps as in setting a
supervisor password.
To clear the supervisor password, select the
Change Supervisor Password then
press <Enter> . The message “ Password uninstalled ” appears.