28
AP2000 Hardware Reference Guide
II. Components
II. System Components
Motherboard Securing
Remove the extended expansion card guide before installing or removing
the motherboard. All screws are necessary to provide the needed stabiliza-
tion to support all the motherboard expansion cards used in a server.
Place four spacers in the ar-
eas circled on the chassis.
Installed P2B-DS motherboard
Place nine screws in the areas
circled on the motherboard.
There is a chassis intrusion con-
nector here.
The chassis provides an micro toggle
switch that must be connected to the
motherboard for the intrusion detec-
tion to work. The motherboard will
signal the ASMA software when the
side panel is opened. The connection
diagram is given here.
Chassis Intrusion Switch
Motherboard’s chassis
intrusion connector
+5VSB
Chassis Signal
From chassis micro switch
