WL-AM602 Combo Router User Manual
LAN
USB
ACT
STATUS
POWER
Configuring your computer
Prior to accessing the router through the LAN/USB port, note the following necessary
configurations :
• Your PC’s TCP/IP address:
92.68..__
( the last number is any number
between 2 and 254)
• The router’s default IP address:
92.68..
• Subnet mask:
2.2.2.0
Below are the procedures for configuring your computer. Follow the instructions for the
operating system that you are using.
Windows
®
2000
1. In the Windows taskbar, click
Start > Settings > Control Panel > Network and
Dial-up Connections
.
2. Click
Local Area Connection
. From the
Local Area Connection Status
screen,
click
Properties
.
3. The list for the installed network components is displayed. If the list includes
Internet Protocol (TCP/IP)
, then the protocol has already been enabled, and you
can skip to Step 10.
4. If
Internet Protocol (TCP/IP)
does not appear as an installed component, then click
I
nstall
.
5. In the
Select Network Component Type
window, click
Protocol
and then the
Add
button.
6. Select
Internet Protocol (TCP/IP)
from the list and then click
OK
.
7. If you are prompted to restart your computer with the new settings, click
OK
.
8. After your computer restarts, click the
Network and Dial-up Connections
icon
again, and right click the
Local Area Connection
icon and then select
Properties
.
9. In the
Local Area Connection Properties
dialog box, select
Internet Protocol
(TCP/IP)
and then click
Properties
.
10. In the
Internet Protocol (TCP/IP) Properties
dialog box, select
Use the following
IP address
and key in
92.68..X
(where X is any number between 2 and 254)
and
2.2.2.0
in the
IP address field and Subnet Mask
field.
11. Click
OK
to save your changes and then close the
Control Panel
.
