STP Bridge
If you decide to enable the STP Bridge function of the router, then
click on the box and then Apply to save.
Wireless
This section allows you to configure wireless settings on your
router.
Wireless Settings
This section is the wireless settings page with all the fields
already filled in with the router’s default information. You will not
need to change the information unless you have specific changes.
Below is a description of the wireless settings—
AP Name—this is the name for your router
SSID Mode—includes
Advertise SSID
and
Hide SSID
ESSID—this is the same as the AP name
Channel ID—includes channel 1 to 14
Preamble Mode—includes short and long preamble and auto
Operation Mode—includes 802.11b rate only, 802.11g rate only,
and auto
Beacon Interval
—
a packet of information that is sent from a
connected device to all other devices where it announces its
availability and readiness. A beacon interval is a period of time
(sent with the beacon) before sending the beacon again. The
beacon interval may be adjusted in milliseconds (ms).
RTS Threshold (Request to Send Threshold)—determines the
packet size of a transmission through the use of the router to help
control traffic flow.
Fragmentation Threshold
--
used to fragment packets that help
________________________________________________________________________
ASUS 4-Port Ethernet
23
Wi-Fi Router (AAM6X20VI-F1)
User Manual
Version 1.2
Document #: BD-AU0011-12
