AAM6020VI ADSL Wireless Modem Router Quick Installation Guide
Page
3
Getting Started
Hardware Installation
Please follow the steps in the sequence outlined below. Fail to do so could result in damage of
your ADSL wireless modem.
Step 1: Connect a RJ-11 cable from wall phone jack to the connector “LINE” on the back of
the modem.
Step 2: Connect the AC adapter to the modem by inserting the barrel-shaped connector into the
mating power connector on the back of the modem, and plug in the adapter to a wall outlet
or a power strip.
Step 3: Connect any LAN port on the back of the modem with a UTP cable, and other end of
UTP cable directly link to RJ-45 port of your PC’s network card.
Step 4: Power on your PC and modem, now you are ready to configure PC.
Note
: You can also use wireless interface to configure your modem, then please
directly proceed step 4 and make sure your wireless card driver has been installed
properly.
Caution:
Please do not power on your PC and modem before connecting
steps are finished as mentioned above.
