AAM6010EV-M ADSL Combo Router User’s Manual
If Enable Automatic Assigned DNS checkbox is selected, this router will accept the first received DNS
assignment from one of the PPPoA, PPPoE or MER/DHCP enabled PVC(s) during the connection
establishment. If the checkbox is not selected, enter the primary and optional secondary DNS server
IP addresses. Click
to save it.
NOTE: If changing from unselected Automatic Assigned DNS to selected Automatic Assigned DNS,
You must reboot the router to get the automatic assigned DNS addresses
Figure 6.20 DNS Server Configuration
6.7 ADSL
6.7.1 ADSL
Setting
There are several ADSL setting parameters available on AAM6000EV-M listed below:
f
ADSL line modulation: Auto Mode, G.DMT/G.Lite, T1.413, G.DMT and G.Lite.
f
Phone line pair: Inner or Outer pair of RJ11 connector
f
Trellis coding: On or OFF
f
SNR value setting (in HEX)
You may
to save it or click
to configure other advanced parameters.
6.7.2
ADSL Advanced Setting
You also may choose the test mode and individual tone settings in this Advanced Setting (Figure 6.22 and
6.23), but any change on these are not recommend.
WARNING
Do not modify these parameters since they might result in a
connection failure or performance degrade unless you really know
what you are doing.