Asus AAEON RTC-1010, Руководство пользователя

Страница: 23 / 55

Chapter 2 – Getting Started 11
Ru
gg
ed
Ta
blet
C
omp
uter
RT
C-
10
10
2.2 Notes before use
Before using your device, please read through the following instructions
⚫
Use only the power adapter that comes with your device. Using a different
power adapter may cause damage.
⚫
The AC power cord is designed for the RTC-1010 only.
⚫
This product is intended to be supplied by a Listed Power Adapter or DC power
source, rated 12Vdc, 3A minimum, Tma = 40°C. Please contact AAEON for
further assistance.
⚫
Using a power outlet is the best way to charge your device (refer to section 1.2
for the power adapter’s voltage output and acceptable input).
⚫
When using the device for the first time, fully charge the battery for up to 8
hours. If the device is inactive, charging the battery once per month is
recommended to prevent battery life deterioration.
⚫
There are two batteries in the RTC-1010: Both batteries can be monitored at the
title bar). Charge the device once Hot-swappable battery drops below 20%.
⚫
Always allow your battery to be fully charged before use.
⚫
To prolong battery life, allow a fully charged battery to discharge more than
95% before recharging.
⚫
Ensure that the battery cover is properly secured by manually pushing the pin to
lock position.
⚫
The RTC-1010 CANNOT be charged via an USB connection.
⚫
The IP65 waterproof protection may get damaged when subjected to shock
greater than levels tested in MIL-STD-810G Method 516.6 Procedure IV. The
protection may also be affected if the rubber connector fails to cover or close
firml y.