Asus A7A133, Руководство пользователя, Страница: 18 / 96

ASUS A7A133 User’s Manual
3. HARDWARE SETUP
18
2) Voltage Regulator Output Setting (VID)
This jumper allows you to manually adjust the CPU core voltage. It is better to
use the CPU Default for the CPU core voltage. CPU Default means the Vcore
is generated according to the CPU VID configuration. Disabling the Voltage
regulator output allows higher voltage settings to be made; however care must
be exercised not to damage the CPU.
A7A133
A7A133 VID Selection
Enable
(Default)
VID
Disable
2 3
1 2
3) Bass Center Setting (BCS1, BCS2)
Use these jumpers in conjunction with the C-Media PCI Audio Driver to adjust
output for 6 speaker audio. No audio standard exists for the three pick-up
surfaces on male audio jacks, therefore it may be necessary to switch jumpers
from the default position to reroute signals among the internal leads to the Line-
In, Line-Out, Mic female sockets. Make sure a test is made using the C-Media
Audio Driver software setup available on the Support CD. These jumpers
effectively swap the audio channels for bass and center.
A7A133
A7A133 Bass Center Setting
(CENTER/BASS)
2 3
BCS1
BCS2
(BASS/CENTER)
(Default)
1 2
BCS1
BCS2
Motherboard Settings
3. H/W SETUP