
1-1
1
PRIME H610I-PLUS D4
Product Introduction
1.1
Before you proceed
Take note of the following precautions before you install motherboard components or change
any motherboard settings.
•
Unplug the power cord from the wall socket before touching any component.
•
Before handling components, use a grounded wrist strap or touch a safely grounded
object or a metal object, such as the power supply case, to avoid damaging them due
to static electricity.
•
Before you install or remove any component, ensure that the ATX power supply is
switched off or the power cord is detached from the power supply. Failure to do so
may cause severe damage to the motherboard, peripherals, or components.
Unplug the power cord before installing or removing the motherboard. Failure to do so can
cause you physical injury and damage motherboard components.
The pin definitions in this chapter are for reference only. The pin names depend on the
location of the header/jumper/connector.
1.2
Motherboard overview
Place this
side towards
the rear of the
chassis
17.0cm(6.7in)
17.0cm(6.7in)
CHA_FAN
CPU_OPT
CPU_FAN
M.2(SOCKET3)
PCIE
SATA
3.0 X4
X
BATT_CON
M.2(SOCKET3)
LGA1700
F_PANEL
USB_78
COM_DEBUG
SPEAKER
AAFP
COM
U32G1_12
HDMI
DP
VGA
Intel
®
H610
SPI TPM
2280
2260
KBMS_USB56
Super
I/O
SATA6G_4
SATA6G_3
SATA6G_2
SATA6G_1
CLRTC
128Mb
BIOS
Ethernet
Audio
Codec
DDR4 DIMM_A1 (64bit, 288-pin module)
ATX_PWR
DDR4 DIMM_B1 (64bit,288-pin module)
PCIEX16(G4)
ATX_12V
AUDIO
LAN_U32G1_34
M.2(WIFI)
MONO_OUT
SMBUS
10
1
5
19
9
17
7
8
3
6 16
12
13
18
14
11
4
5
2
15