1-2
1.2.1 Layout contents
1. CPU socket
The motherboard comes with a LGA1200 socket designed for 11
th
Gen Intel
®
Core™
Processors & 10
th
Gen Intel
®
Core
TM
, Pentium
®
Gold and Celeron
®
Processors.
For more details, refer to
Central Processing Unit (CPU)
.
2. DDR4 DIMM slots
The motherboard comes with Dual Inline Memory Modules (DIMM) slots designed for DDR4
(Double Data Rate 4) memory modules.
For more details, refer to
System memory
.
3. Expansion slots
This motherboard supports one PCIe x16 graphics card and two PCIe 3.0 x1 network cards,
SCSI cards and other cards that comply with the PCI Express specification.
4. Fan headers
The Fan headers allow you to connect fans to cool the system.
5. Power connectors
These Power connectors allow you to connect your motherboard to a power supply. The
power supply plugs are designed to fit in only one orientation. Find the proper orientation and
push down firmly until the power supply plugs are fully inserted.
Ensure to connect the 8-pin power plug.
•
For a fully configured system, we recommend that you use a power supply unit
(PSU) that complies with ATX 12V Specification 2.0 (or later version) and provides a
minimum power of 350W.
•
We recommend that you use a PSU with a higher power output when configuring a
system with more power-consuming devices. The system may become unstable or
may not boot up if the power is inadequate.
•
If you are uncertain about the minimum power supply requirement for your system, we
recommend you to refer to online resources for Power Supply Wattage Calculator.
6. M.2 slot (Key M)
The M.2 slot allows you to install an M.2 device such as an M.2 SSD module.
•
The M.2 slot supports PCIE 3.0 x4 and SATA modes M Key design and type
2242/2260/2280 storage devices.
•
The M.2 slot shares bandwidth with the SATA6G_2 port. When a device in SATA
mode is installed on the M.2 socket, the SATA6G_2 port cannot be used.
GND FAN PWR FAN IN FAN PWM
FAN PWM
FAN IN
FAN PWR
GND
FAN PWM
FAN IN
FAN PWR
GND
Chapter 1: Product Introduction