RST-2
3
SETTINGS
CLOCK SETTING
Press and hold the "CLOCK" button, then press the "DAY"
button to select the day of the week, "HOUR" to set the hour,
and "MINUTE" to set the minutes.
Each selection will increment by one unit every time the
corresponding button is pressed. Faster increment can be
achieved by holding down the button for a second or more.
Release button when desired setting is reached.
The LED indicator will blink once every time a button is pressed
or every time the selection switches to the next setting while the
button is held down.
Ensure that the time and the period
of day (A.M./P.M.) are correctly set.
The remote start-ups may otherwise occur
at times other than those scheduled.
SCHEDULED START-UPS
Press the "SET" button. Digit "1" blinks and
display shows current program for scheduled
start-up nº 1 or, if not previously programmed,
a series of four dashes.
Digits "1 to 8" refer to scheduled start-ups.
Press "SET" button to select the scheduled
start-up you wish to set. When the desired
digit starts blinking, press the "DAY" button to
select the day(s) of the week, "HOUR" to set the hour, and
"MINUTE" to set the minutes.
1
)
OR
1
AM
&) $
MO
