manualshive.com logo in svg

AstroNova QuickLabel QL800, Руководство пользователя

АстраНова QuickLabel QL800 - высококачественный цифровой принтер для печати этикеток. Этот продукт обеспечивает легкость использования и высокую производительность. Чтобы узнать больше о настройке и использовании принтера, вы можете бесплатно скачать руководство пользователя с {веб-сайта}.

Поделиться
Скачать
background image

Safety Warnings and Precautions

160

QL-800 User Guide

 

Power Supply and Power Cord

Warning

•

To avoid causing a fire or serious electrical shock, always use the power cord provided with 
this printer. To avoid a fire or electrical shock, do not use an extension cord.

•

To avoid causing a fire or serious electrical shock, make sure that the power plug is 
securely and completely inserted into the power source. To avoid personal injury from an 
electrical shock, never handle the power cord or plug when your hands are wet.

Caution

•

Be sure to turn off the printer before removing the power plug from the outlet.

•

Check the power plug and cord for any problem (abnormal heat, rust, bend, cracks, 
scratches, etc.) at least once a month. If any problem with the power plug or cord is found, 
replace it. Using it without replacement can result in a fire or electrical shock hazard.

•

To avoid damaging the power plug, which could cause a short circuit and cause a fire or 
electrical shock, never pull on the power cord to unplug the cord from the power supply. 
Always grip the plug to remove it from the power supply.

•

If the printer will not be used for a long period, for your safety disconnect the power cord 
from the power source.

•

Never use any power source other than the one rated for the printer. This printer is 
designed to be used in the region where purchased. Also, make sure the power source can 
supply sufficient power for the printer. This could cause a fire or serious electrical shock, or 
damage the printer.

General Safety

Warning

•

If you find a large ink leak, switch the printer off immediately, disconnect the power plug 
from the power source, and call for service. If you continue to use the printer, this could 
cause a fire or serious electrical shock.

•

Never clean the printer with water or any flammable liquid (alcohol, benzene, thinner, etc.) 
either applied directly or with a cloth. If you accidentally spill liquid on the printer, switch the 
printer off immediately, disconnect the power plug from the power source, and call for 
service. If you continue to use the printer, this could cause a fire or serious electrical shock.

•

If the printer emits smoke, unusual odors, or makes noises, leaving it could cause a fire or 
serious electrical shock or damage to the printer. Switch the printer off immediately, 
disconnect the power plug from the power source, make sure that the printer has stopped 
smoking, and call for service. Do not attempt to repair the printer by yourself. This could 
cause a fire or serious electrical shock.

•

Use only a slightly damp cloth, thoroughly wrung out, to clean the printer surfaces. Never 
use alcohol, thinner or any other flammable liquids. If such materials come into contact with 
electrical components inside the printer, this could cause a fire or serious electrical shock.

Содержание QuickLabel QL800













































































































































































Отзывы:

Нет отзывов

Похожие инструкции для QuickLabel QL800

NEFF CT636LE Series Installation Instructions Manual preview
CT636LE Series
Бренд: NEFF Страницы: 32
Hamilton Beach A56 Operation Manual - Original Instructions preview
A56
Бренд: Hamilton Beach Страницы: 64
Gold Medal Midori Sno-King 1888W Instruction Manual preview
Midori Sno-King 1888W
Бренд: Gold Medal Страницы: 12
BFC MONZA IMOLA MARANELLO Instruction preview
MONZA IMOLA MARANELLO
Бренд: BFC Страницы: 2
U-Line ADA Height Compliant Series User Manual preview
ADA Height Compliant Series
Бренд: U-Line Страницы: 32
Living & Co CM5018D-GS Instruction Manual preview
CM5018D-GS
Бренд: Living & Co Страницы: 16
Sunbeam EXPRESSBAKE 5833 User Manual & Bread Recipes preview
EXPRESSBAKE 5833
Бренд: Sunbeam Страницы: 80
EdgeStar IB650 Replacement preview
IB650
Бренд: EdgeStar Страницы: 8
Hamilton Beach FlexBrew Universal 49930 Instructions Manual preview
FlexBrew Universal 49930
Бренд: Hamilton Beach Страницы: 32
MACCHIAVALLEY EXCELSIA Manual preview
EXCELSIA
Бренд: MACCHIAVALLEY Страницы: 30
BRAYER BR1103 Instruction Manual preview
BR1103
Бренд: BRAYER Страницы: 52
Cornelius Starbucks UC100 Operator'S Manual preview
Starbucks UC100
Бренд: Cornelius Страницы: 16
Faema Enova S Use And Installation preview
Enova S
Бренд: Faema Страницы: 100
Gourmia GCM6500 Manual preview
GCM6500
Бренд: Gourmia Страницы: 10
Jura IMPRESSA S70 Instructions For Use Manual preview
IMPRESSA S70
Бренд: Jura Страницы: 22
Rancilio Silvia PID Kit Manual preview
Silvia PID Kit
Бренд: Rancilio Страницы: 60
Hamilton Beach 46240 User Manual preview
46240
Бренд: Hamilton Beach Страницы: 5
Beko CFM6201W User Manual preview
CFM6201W
Бренд: Beko Страницы: 96

Бренды по названию

Популярные бренды

Загрузить еще бренды