AstroNova QuickLabel QL800, Руководство пользователя

Страница: 151 / 172

QL-800 User Guide 151
9
External Unwinder
Before Installing the External Unwinder
Before installing the unwinder, observe the following precautions.
• No unwinder feet should float. The unwinder must be held level constantly.
• The unwinder must be installed on the same plane as the printer.
• The unwinder weighs 25 pounds (11.3 kilograms). When placing the unwinder on a desk,
table, or other similar surface, it must be sturdy and stable enough to support the weight of
the printer, unwinder, and roll media. A table that can support at least 150 pounds (68
kilograms) is recommended.
• The unwinder and associated bracket require a surface 43 inches (1093 mm) in length and
21 inches (534) in width.
• If you are installing both the rewinder and unwinder, a surface 51 inches (1296 mm) in
length and 21 inches (534 mm) in width is required.
• Do not turn the unwinder mandrel by hand to unwind the media. Turning the mandrel by
hand can result in unwinder damage.