Astronics Trig-Tek 203M Скачать руководство пользователя страница 3

 

 

 

RETURN OF PRODUCT 

Authorization is required from Astronics Test Systems before you send us your product or sub-assembly for 
service or calibration.  Call or contact Customer Support at 1-800-722-3262 or 1-949-859-8999 or via fax at 
1-949-859-7139.  We can also be reached at: 

[email protected]

.  

If the original packing material is unavailable, ship the product or sub-assembly in an ESD shielding bag and 
use appropriate packing materials to surround and protect the product. 

 

PROPRIETARY NOTICE 

This document and the technical data herein disclosed, are proprietary to Astronics Test Systems, and shall 
not, without express written permission of Astronics Test Systems,  be used in whole or in part to solicit 
quotations from a competitive source or used for manufacture by anyone other than  Astronics Test 
Systems.  The information herein has been developed at private expense, and may only be used for 
operation and maintenance reference purposes or for purposes of engineering evaluation and incorporation 
into technical specifications and other documents which specify procurement of products from Astronics 
Test Systems. 

 

TRADEMARKS AND SERVICE MARKS 

All trademarks and service marks used in this document are the property of their respective owners. 

 

Racal Instruments, Talon Instruments, Trig-Tek, ActivATE, Adapt-A-Switch, N-GEN, and PAWS are 
trademarks of Astronics Test Systems in the United States. 

 

DISCLAIMER 

Buyer acknowledges and agrees that it is responsible for the operation of the goods purchased and should 
ensure that they are used properly and in accordance with this document and any other instructions 
provided by Seller.  Astronics Test Systems products are not specifically designed, manufactured or 
intended to be used as parts, assemblies or components in planning, construction, maintenance or 
operation of a nuclear facility, or in life support or safety critical applications in which the failure of the 
Astronics Test Systems product could create a situation where personal injury or death could occur.  Should 
Buyer purchase Astronics Test Systems product for such unintended application, Buyer shall indemnify and 
hold  Astronics Test Systems, its officers, employees, subsidiaries, affiliates and distributors harmless 
against all claims arising out of a claim for personal injury or death associated with such unintended use. 

 

Содержание Trig-Tek 203M































Отзывы: