D) Auto mode: In Auto mode, press FUNCTION button after entering this mode, the displayer will
display correspondingly SP01 or FS00 or FD00. "SP", "FS" & "FD" denote respectively
color-changing speed, strobe speed & step speed. Press UP & DOWN to adjust respectively
color-changing speed between 01 to 100, corresponding time between 0.12s to 6s, strobe speed
between 00 to 99, corresponding speed between 25Hz to 0.5Hz, step speed between 0 to 10s.
5. CLEANING AND MAINTENANCE
Disconnect from mains before starting maintenance operation!
DANGER TO LIFE!
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth.
Never use alcohol or solvents! There are no serviceable parts inside the device. Maintenance and
service operations are only to be carried out by authorized dealers.
6. TECHNICAL SPECIFICATIONS
Power supply: 220 V AC, 50 Hz ~
DMX 512-output: 3-pin XLR-connector
4-pin signal sockets
Output voltage 24V, 12A current
Dimension; 359mm x 164mm x65mm
Weight: 2.70kgs
Please note: Any information is subject to change without prior notice.
Channel
CH1
CH2
CH3
CH4
CH5
CH6
Mode
P1
Select
internal
program
(128)
Output
Control
Strobe
Speed
No function
Step
Speed
No function
P2
Red
Green
Blue
Output
Control
Strobe
Speed
Step Speed
Содержание LED CONTROLLER II
Страница 1: ...LED CONTROLLER II ...