AstroGadget FocusDream, Руководство пользователя

Страница: 3 / 9

1. Included in unit
1. FocusDream control unit.
2. USB cable.
3. CD ROM with software and user manual FocusDream.
2. GETTING STARTED (for example, modernization of electric focuser Sky-Watcher)
1. Connect the control unit and the engine FocusDream electric focuser regular cable that
comes with the focuser Sky-Watcher.
2. Connect the control unit FocusDream to the computer's USB port cable that comes with the
modernization of the focuser. At the same time on the installation of new equipment a request
to specify the path to the driver on the CD c software: "CD drive": \ driverVirtComPort \ "...".
After you install the equipment manager will be a new device - Virtual Communications Port
(COMx). The device is ready to go!
3. FOCUS UTILTY FocusDream Control panel.
1. Utility FocusDream Control panel is located on the on the CD c software: "CD drive": \
FocusDream Control panel \ FocusDream Control panel.exe
2. When you run the COM port selection in the drop-down menu, select the port
corresponding to the number Virtual Communications Port (COMx) in Device Manager. Use
the "Connect / Disconnect" Link utility FocusDream Control panel with focuser.
3. The utility supports two control modes focuser: intermittent and continuous.
Intermittent focuser control interface virtual buttons
'+ "Or" - "located in a working window utility FocusDream Control panel. One click moves the
focuser by the amount specified in the
"Incremental".
IMPORTANT! Emergency stop Electrical focuser by pressing the button STOP!