DOOR LOCKING AND UNLOCKING
This optional interface allows you to control by remote
several vehicle electrical system options. This interface is
optional and will require the purchase of additional equipment
(see your dealer). The following systems can be controlled:
•
Electronic door lock system.
•
Electronic trunk/hatch release.
•
Interior
light.
COMMANDS
LOCK AND ARM
WITH SIREN ACKNOWLEDGE (3 B)
♥
This command locks all doors and arms the AstroStart™
alarm. (horn:0, parking lights:1, siren:1).
LOCK AND ARM
WITHOUT SIREN ACKNOWLEDGE (1 B)
♥
This command locks all doors and arms the AstroStart™
alarm. The alarm siren remains silent. (horn:0 , parking lights:
1, siren: 0).
UNLOCK AND DISARM
WITH SIREN ACKNOWLEDGE (3 C)
♥
To unlock all doors and disarm the AstroStart™ alarm. (horn:
0, parking lights: 2, siren: 2).
UNLOCK AND DISARM,
WITHOUT SIREN ACKNOWLEDGE (1 C)
♥
This command unlocks all doors and disarms the
AstroStart™ alarm. The optional alarm siren remains silent.
(horn:0, parking lights:2, siren:0).
♥
Commands 1B and 1C are interchangeable with 3B and
3C by programming, refer to “User Programming” section.
LOCK, WITHOUT ARMING (2 B)
To lock all doors without arming the alarm. (horn:0 , parking
lights: 1, siren:0)
OPEN TRUNK, UNLOCK AND DISARM WITH SIREN
ACKNOWLEDGE (2 C)
This command unlocks all doors, disarms the AstroStart™,
and releases the trunk with a siren acknowledge (horn: 0,
parking lights: 2, siren: 2)
AUXILIARY OUTPUTS (3BC and 3CB)
Connection of this output is optional and is highly flexible to
adapt to various needs. Consult your local AstroStart™
dealer for typical applications.
SUPPLEMENTARY OUTPUTS (3AB and 3BA)
These outputs have been created to activate a power window
module. Enter 3 AB to open windows, and 3 BA to close
windows. The AstroStart™ alarm will automatically close the
windows when alarm is activated (1B or 3B command) or
when alarm is triggered.
UTILITY OUTPUTS (3 AC AND 3 CA)
This output may be used to control almost anything inside
your vehicle, i.e.: turn the radio ON/OFF, or other things such
as lights etc...)
TEMPORARILY DISEABLE SHOCK SENSORS (3B&A)
This command disable all shock sensors. (horn: 0, parking
light: 4, siren: 0). The shock sensors will be re-enable when
pressing the brake pedal.
USER PROGRAMMING
Your AstroStart™ system is designed to provide the ultimate
convenience and flexibility. There are several options that
you as the owner have in controlling how your system works.
These options are selected in the “User Programming Mode”.
Refer to the “User Programming Codes” for a listing of all
options and factory pre-sets. If you wish to change any
parameters, follow this procedure in entering and exiting the
“User Programming Mode”
1) TO ENABLE THE TRANSMITTERS PROGRAMMING
MODE
Push “P” four (4) times
The
GREEN LED
illuminates
Push “A,B,C” simultaneously The
RED LED
should now be
flashing rapidly, the system will
remain in the “User Programming
Mode” for five (5) minutes.
2) TO ENABLE THE MODULES PROGRAMMING MODE
(UNIT INSTALLED IN VEHICLE)
•
Turn the main system switch OFF.
•
Turn the ignition key to the ON position.
Do not start the engine.
•
Turn the main system switch ON.
•
Turn the ignition OFF.
The parking lights will flash four times to acknowledge.
Programming commands can now be entered through the
remote control ( refer to the programming chart below). Exit
the programming mode by depressing the brake pedal.
Push “P” four (4) times The
GREEN LED
illuminates
Push “A, B, C”
simultaneously again
RED LED
will flash slowly and turn
off).
RS-414 USER PROGRAMMING CODES
LED PRESS
DESCRIPTION
1,1
1AA Activate internal buzzer
1,2
1AB Deactivate internal buzzer
1,3
1AC Set the AstroStart™ alarm in active mode
1,4
1BA Set the AstroStart™ alarm in passive mode
1,5
1BB Set entry delay to 30 sec when the alarm is in
passive
mode
1,6
1BC Set entry delay to 15 sec when the alarm is in
passive mode
1,7
1CA No entry delay, disarm with remote in passive
mode
1,8
1CB Passive rearming after 20 seconds
1,9
1CC Passive rearming after 40 seconds
1,12 1C
Pre shock warning on a small impact
1,13 1A&B Alarm is triggered even on small impact
1,14 1A&C Warning on first violation (optional shock sensor)
1,15 1B&C Alarm triggered on first violation
(optional shock sensor)
2,1
2AA Set Autolock option to OFF
2,2
2AB Set Autolock 1 ON; lock doors when engine
running with key and brake pedal is depressed.
Doors unlock when engine is stopped or when
continuous mode is activated.
2,3
2AC Set Autolock 2 ON; lock doors when transmission
is out of
park/neutral position and
engine speed is
over 1200 RPM. Doors unlock when transmission
is in park or neutral position.
2,4
2BA Set Autolock 3 ON; lock doors when transmission
is out of
park/neutral position and
engine speed is
over 2000 RPM. Doors unlock when transmission
is in park or neutral position.
2,5
2BB Doors lock automatically when arming passively
2,6
2BC No automatic locking on passive mode
2,7
2CC F1 = no chirp, F3 = chirp
2,8
2A
F1 = chirp, F3 = no chirp
2,9
2B
Pre-shock = 5 horn honk
2,10 2C
Pre-shock = musical horn (4 melodies)
3,1
3AA Engine run time set at 15 minutes
3,2
3AB Engine run time set at 20 minutes
3,3
3AC Engine run time set at 10 minutes
3,4
3BA Engine run time set at 5 minutes
3,5
3BB Sentinel starts engine at -15ºC
3,6
3BC Sentinel starts engine at -10ºC
3,7
3CA Sentinel starts engine at -5ºC
3,8
3CB Sentinel starts engine at 0ºC
3,9
3CC Alarm duration = 30 seconds
3,10 3A
Alarm duration = 45 seconds
3,11 3B
Alarm duration = 60 seconds
3,12 3C
Alarm duration = 90 seconds
3,13 3A&B Engine run time set at 30 minutes (DIESEL
ONLY)
3,14 3A&CEngine run time set at 40 minutes (DIESEL
ONLY)
0,0
4AA View next programmed function via the LED
4AB View previous programmed function via the LED
0,0
4CB Main switch LED display mode
0,0
4CC Main switch LED tach test. Use this command
for visual tach test
After programming all of the necessary parameters, refer to
LIMITED ONE YEAR WARRANTY
The product manufactured by ASTROFLEX Inc. is warranted to the original
consumer purchaser to be free from defects in workmanship and material within
one (1) year of the date of purchase. ASTROFLEX shall repair or replace the
product or any part of the product which ASTROFLEX agrees is defective without
charge provided the product is returned to ASTROFLEX freight prepaid and
accompanied by a copy of the purchase receipt. This warranty does not cover
damages resulting from accident, physical or electrical misuse or abuse, improper
installation, alteration, any use contrary to its intended function, unauthorized
service by anyone other than ASTROFLEX or its authorized service personnel.
ASTROFLEX shall not be responsible for removal and/or reinstallation charges,
damage to or theft of the vehicle or its contents, or any incidental or
consequential damages caused by any failure of the product to function properly.
The sole remedy for breach of this warranty and the sole obligation of
ASTROFLEX hereunder is the repair or replacement of the defective product as
ASTROFLEX’s option. ASTROFLEX shall have no liability whatsoever at any
time for any personal injury or property damages or for any special, indirect or
consequential damages of any kind howsoever arising.
This warranty is strictly limited to its terms and is in lieu of any kind and other
warranties and conditions, written or oral, whether express or implied.
WARNING
Changes or Modifications not expressly approved by ASTROFLEX bould void the
User’s authority to operate the equipment.
DOC DOCUMENT:
This device complies with the requirements of the Department of
Communications (DOC), Canada, as specified in document RSS0-210. The
device is permitted only on a no-interference no-protection bases, that is, it must
cease operation when it is determined that it causes harmful interference to
services authorized by DOC. Also, the operator must accept any radio
interference received, including interference that causes undesired operation of
the device.DOC Certification No: 1854 K1066
FCC Document:
This device complies with Part 15 of the FCC rules.
Operation is the subject to the following conditions:
(1) this device may not cause harmful interference and
(2) this device must accept interference that may cause undesired
operation.
NOTE
This equipment has been tested and found to comply with the limits for a class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television, which can be
determined by turning the equipment OFF and ON, the user is encouraged to try
to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna
•
Increase the separation between the equipment and receiver
•
Connect the equipment into an outlet on a circuit different from that to the
receiver is connected
•
Consult the dealer or an experienced radio / T.V. technician for help
FCC APPROVAL No. J5FRS-3R
Due to continuing product improvement, specifications and design are subject to
change without notice.
