AstroAI JC-90-E, Руководство пользователя

Страница: 6 / 14

● Secure the cooler in a well-ventilated area after standing still. Do not
install or operate the cooler in an enclosed area. Allowance of at
least 2 inches (50 mm) of space between the back, sides and top of
the cooler is suggested, this ensures the correct air circulation to
cool the compressor and condenser.
℉
℉
℉
OPERATION
● Remove all packaging materials including foam, adhesive tapes for
holding cooler accessories and printing materials.
● Let the cooler stand still at least 6 hours before turning power on.
Ground level the cooler to ensure it is always in a horizontal position.
a. Use the leveling feet that are located on the front foot of cooler to
adjust;
b. Rotate the leveling feet clockwise to lower the height of
the cooler;
c. Or rotate the leveling feet anti (counter)-clockwise to
increase the height of the cooler;
d. When the two front horizontal feet are slightly extended, the door
will be easier to close.
● After moving the cooler to its final position, level the cooler to make
it horizontal.
● Connect the power cord into a standard wall outlet.
● A number will appear on the display for 3s-5s after powering on.
This number is the preset temperature set by the factory. The unit is
in Fahrenheit.
● After the preset temperature number, the display will show another
number. This is the cooler’s current internal temperature.
℉
℉