Single cards
Plug in the card. Connect the tuner connection cable of
the tuner with the output of the SAT distributor, which car-
ries the required polarization.
5.2
5.3 Cards for terrestrial conversion
Because the SAT distribution board is suitable exclusively for
SAT intermediate frequencies (950-2150 MHz), the inputs
from terrestrial cards (e.g. X-TU 860, X-twin FM, X-FM ampli-
fiers or X-DVB-T/Pal) must be fed in via external inputs.
Remove the nut screwed onto the connection cable and remo-
ve the washer. Plug in the card. Remove the plastic cover of
the required external input. Install the F-connector of the
connection cable in the required external input hole (Fig. 9)
5.3
(De-) Modulator cards
Install the D-sub connectors supplied with the card in the
provided feedthroughs (Fig. 10) after previously breaking
out the pre-punched metal covers.
Plug in the card. Connect the 6-pin post connector in
accordance with the operating instructions of the
plug-in card.
7
5
Installing plug-in cards
Lift out and remove the
interlocking device by lightly
pressing to the right (Fig. 7).
It’s a good idea to place the
bar on top of the X-8 while
the card is being installed.
The connection labels speed
up correctly assigning, for
example, the SAT inputs.
Further, thanks to the identi-
fication of the connected
orbit positions and polarizati-
ons and the terrestrial anten-
nas, easy maintenance is ensured in the future.
IMPORTANT NOTE:
Installing of plug-in cards only after disconnecting
the mains supply of the base unit!
5.1
Cards with SAT tuner
Twin cards
Ensure that all tuners (A and B) of
the plug-in cards to be installed
have a separate connection cable
(Fig. 8).
Remove any loop through cables or
distributor cables that are present
and install the supplied cable. Plug
in the card. Connect the tuner A
connection cable to the correspon-
ding output SAT distributor board.
Connect the tuner B connection
cable to the corresponding output of
the SAT distribution board.
5 Installing plug-in cards
5 Installing plug-in cards
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Single cards
Plug in the card. Connect the tuner connection cable of
the tuner with the output of the SAT distributor, which car-
ries the required polarization.
5.2
5.3 Cards for terrestrial conversion
Because the SAT distribution board is suitable exclusively for
SAT intermediate frequencies (950-2150 MHz), the inputs
from terrestrial cards (e.g. X-TU 860, X-twin FM, X-FM ampli-
fiers or X-DVB-T/Pal) must be fed in via external inputs.
Remove the nut screwed onto the connection cable and remo-
ve the washer. Plug in the card. Remove the plastic cover of
the required external input. Install the F-connector of the
connection cable in the required external input hole (Fig. 9)
5.3
(De-) Modulator cards
Install the D-sub connectors supplied with the card in the
provided feedthroughs (Fig. 10) after previously breaking
out the pre-punched metal covers.
Plug in the card. Connect the 6-pin post connector in
accordance with the operating instructions of the
plug-in card.
7
5
Installing plug-in cards
Lift out and remove the
interlocking device by lightly
pressing to the right (Fig. 7).
It’s a good idea to place the
bar on top of the X-8 while
the card is being installed.
The connection labels speed
up correctly assigning, for
example, the SAT inputs.
Further, thanks to the identi-
fication of the connected
orbit positions and polarizati-
ons and the terrestrial anten-
nas, easy maintenance is ensured in the future.
IMPORTANT NOTE:
Installing of plug-in cards only after disconnecting
the mains supply of the base unit!
5.1
Cards with SAT tuner
Twin cards
Ensure that all tuners (A and B) of
the plug-in cards to be installed
have a separate connection cable
(Fig. 8).
Remove any loop through cables or
distributor cables that are present
and install the supplied cable. Plug
in the card. Connect the tuner A
connection cable to the correspon-
ding output SAT distributor board.
Connect the tuner B connection
cable to the corresponding output of
the SAT distribution board.
5 Installing plug-in cards
5 Installing plug-in cards
Fig. 7
Fig. 8
Fig. 9
Fig. 10
