ASTRO VG-881, Инструкция по эксплуатации

Страница: 28 / 41

3.2 Manual Test
Manual Test is a mode to operate the unit manually by the front panel.
Select Manual Test in the fig 3.1.1.
3.2.1 Large group selection
Fig. 3.2.1 Large group selection display
<Operation>
1. Move cursor by up/down key. Select the group by right key.
Note) the program is executed from No. 1 of each output.
2. By pressing left key, the screen is back to the large group execution.
（
Fig. 3.2.3 Display (Large
group executions).
Note) the previous program remains in each interface.
3.2.2 Sample Program
Internal timing and pattern is selected and output.
Note) Just after selecting a group, nothing is output.
Group
Active I/F (Slot)
Timing
Pattern
Fig. 3.2.2 Display (Sample Program ）
<Operations>
1. Using up/down key to activate the interface. Select the interface by right/left key.
2. Select Timing by Timing selection key.
3. Select the Pattern by Pattern selection key.
Note) When ALL Key is pressed, is displayed on the VFD, and the setting is
reflected on all interface.
ALL
18