ASTRO VG-876 Скачать руководство пользователя страница 230

Страница: 230 / 543

216

9.5. Formatting

9.5.1. Internal memory formatting and data installation

The procedure for formatting the internal memory is described below.

Formatting the internal memory will delete the data required

for the generator’s operation so the steps

for data installation and firmware version updating must be taken after the memory has been formatted.

1. Have the required data ready.
2. Format the internal memory.

..... Refer to

<Formatting procedure>

3. Turn the power on from the off status.
4. Install the data.

..... Refer to

<Data installation procedure>

5. Turn off the power.
6. Update the firmware version.

..... Refer to

<Firmware version updating

procedure>

7. Power off the power, and then turn it back on.

・

The required data is the data in the

InitialData

folder on the SP-8870 software installation disk

which is provided with the VG generator so copy it into the USB Memory.

・

If the firmware version has been updated at some point after the generator was purchased, the data

of the updated version will be required.

Further action must be taken in either of the following events.
Make inquiries with your dealer or an ASTRODESIGN sales representative.



When APDC patterns (optional) are being used

APDC patterns are not included in the data provided with the SP-8870 software.



When the VG generator is not a standard model

The data provided with the SP-8870 software is for a standard model.

CAUTION

Содержание VG-876
































































































































































































































































































































































































































































































































































Результаты поиска

Содержание VG-876

Отзывы:

Похожие инструкции для VG-876

Бренды по названию

Популярные бренды

ASTRO VG-876, Инструкция по эксплуатации

Результаты поиска

Содержание VG-876

Отзывы:

Похожие инструкции для VG-876

Бренды по названию

Популярные бренды