ASTRO VD-1673, Инструкция по эксплуатации, Страница: 24 / 37

12
2.3.3 Control method - VG-849 or 859 series generator
To control the VD-1673 using a VG-849 or 859 series generator, proceed with the connections and
control in the sequences given below.
„
Connections
1. Using the HDMI cable, connect the HDMI output port of the VG-849 or 859 series
generator to the input 1 port of the VD-1673.
2. Turn on the power of the VD-1673.
3. Turn on the power of the VG-849 or 859 series generator.
„
Control
When the VG-849 or 859 series generator is operated in the sequence shown below, the
“HDMI Switcher Setting” control screen appears on the display.
FUNC → 3 → SET → TIMING → SHIFT → B or C (* Press the
number which will result in displaying “HDMI Switcher Setting” on the bottom level of the front
panel display.)
Timing Edit: B (0 - B)
HDMI Switcher Setting
Fig. VG-849/859 series generator front panel display 1: Timing data selection
→ SET
Mode: Selection (0/1)
In: 1 (1/2) Out: 1 (1-8)
Fig. VG-849/859 series generator front panel display 2: HDMI Switcher Setting
* The VG-849 or 859 series generator will not recognize the VD-1673 unless the
connections are performed in the sequence described above.
* When exercising control over the VD-1673 using a VG series generator, connect the
generator to the input 1 port of the VD-1673. (The switcher cannot be controlled in
this way if the generator is connected to the input 2 port.)
CAUTION