ASTRO VA-1842, Инструкция по эксплуатации, Страница: 395 / 399

Chapter 12 VA-1842 Specifications
379
■
USB
Item Rating
HOST×2
Connect with the USB mouse to use it.
Connect with the USB flash memory device to use
it. (*)
DEVICE Connect with a PC to use the utility software.
* Use the USB flash memory device provided as standard.
■
LAN
Item Rating
Connect with a PC to use the utility software.
■
COAX input/output
Item Rating
COAX IN/OUT
Audio format SPDIF, IEC60958, 61937
Sampling frequency 32 k to 192 kHz (L-PCM 8CH)
No. of bits. 16, 20, 24 bit
■
TRIGGER
Item Rating
TRIGGER TRIGGER or I2S output
For details on the specifications, refer to 11.2.2 TRIGGER Connector.
* This function is optional. For details, consult with an ASTRODESIGN sales representative.
12.4.3 Restrictions
・
When operating with the SINK data of the VA-1842 set to receiver (monitor), signals are not output from
the HDMI output and COAX output.
・
When operating with the sink data of the VA-1842 set to DVI, audio cannot be input and output.
・
When the SINK data of the VA-1842 is set to repeater and a device which does not support HDCP is
connected to the
HDMI output, HDCP will not be executed properly. (The sequence cannot proceed due to a DDC line
ACK error on the HDMI output side.)
・
When a monitor with no physical address is connected to an output, the physical address of the VA unit
does not change.
・
When headphones are connected to the headphone jack, no sound will be output from the speakers.
・
Up to five windows including the active window can be displayed.
・
The maximum number of packets that can be selected in Generate General Setting is 6.
・
The small window for video timing displayed by the HDMI icon and the small window for the clock cannot
be displayed at the same time.
・
Use an HDMI cable with a length up to 2 meters.
・
Use the mouse and USB flash memory device supplied with the VA-1842.
・
Generate can be used only in the receiver mode.
・
When YC422 is input with 2 or more repetitions, LCD display is not correct.