manualshive.com logo in svg

ASTRO U100-C, Руководство по эксплуатации

Поделиться
Скачать
ASTRO U100-C Скачать руководство пользователя страница 27

27

 

Operating Manual U 110-C Controller

27

The settings in the “SNMP System information” field have already been described in chapter 3.7.

The SNMP settings can be accessed using the link “SNMP on the left side of the web interface 
screen. The page which then opens is shown in figure 35. Along with the SNMP system informa-
tion, SNMP trap receivers can also be set up. To do so, enter the IP address of the trap receiver 
and then use the “Add trap sink” button to copy this into the column “Action”.

In the SNMP MIBs field both the ASTRO Strobel MIB as well as the AstroStrobel-Edge-CTRL 
MIB can be downloaded.

9 

Updating

All information on updating the U 1xx signal converter and the U 100-C controller itself can be 
found in the sub-menu “Update”. The sub-menu can be accessed using the link “Update” in the 
left frame of the web browser user interface. 

9.1  Uploading locally stored update archives to the U 100-C controller

To ensure that the U 100-C controller can update the U 1xx signal converter in use, the update 
archive required must first be copied onto the U 100-C controller. This can be done using the 
locally-stored archive, or using an FTP server download (see chapter 9.2).

Using the “Search” button, a file-upload window is opened in which the selection of the archive for 
upload is made. A valid archive must be selected, as the controller checks the file and discards 
any invalid files.
After successfully uploading, the update archive appears in the “Update archives” field and is 
available as an option for an update in the “U 100 headend update” field in the column “Update 
options” on the respective matching U 1xx signal converter.

9.2  FTP server download of update archives

Update archives can alternatively be downloaded from an FTP server.
This feature is explained in the following using the ASTRO firmware server as an example:

Figure 36: Dialogue field “Add archive”

Figure 37: Input screen for downloading update archives from the server

Содержание U100-C





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды