ASTRO FHP2, Руководство по эксплуатации

Страница: 32 / 34

Fiber Scope user manual (release 1.0)
5
2 Brief description
The optical fibre microscope allows the connector surface of SC, SC or ST fibre optic
connectors to be appraised. The layout of the internal optical lenses allows 400×
magnification.
Optical fibres with ferrules with a 2.5 mm diameter (SC, FC or ST) can be connected
Both APC (8°) or UPC and PC (0°) connectors can be inserted
If the optical fibre has been inserted into the front of the optical fibre microscope, then
the end of the fibre can be focussed using the wheel.
Pressing the wheel below the eyepiece switches on the internal lighting, allowing the
surface of the glass to be seen clearly.
The 3 × AAA batteries are inserted into the battery compartment on the same side as
the optical plug contact (screw open the knurled cap).
The connection for the optical fibre can be screwed off. The glass contact surface
should be cleaned regularly using a suitable cleaning material to prevent any
misinterpretations due to dirt on it when viewing the surface of the fibre.
The device may lose its function after a hard impact or fall, as the internal optical lenses
may break out of their holders. Please handle with care, and prevent any loss of
function due to improper treatment.
Important – always ensure there are no signals!
Inserting fibres that conduct laser signals is not permitted and is, in any
case, prohibited.
It must be guaranteed that there are no signals.
Activating a laser on the fibre for appraisal during the testing process
must be avoided as well.
Laser light can burn into the retina of the eye and cause permanent
damage to vision.
DRAFT VERSION