Page 1
Step 1
Remove Printer and
Accessories from packaging
Place Printer on a stable surface. Use
the Bubble Gauge mounted on the Print
Engine (
or a small level
) to make sure
the Printer is level.
Step 2
Remove Service Station Transport Tab and
Shipping Tape
1.
Open Top Cover.
2.
Open Print Engine Clamshell (
2 latches
).
CAUTION
HOLD ONTO BOTH LATCHES WHEN OPENING AND
CLOSING CLAMSHELL TO PREVENT DAMAGE.
DO NOT ALLOW CLAMSHELL TO DROP OR SLAM
CLOSED. A STOP LIMITS RAISING CLAMSHELL MORE
THAN 60°.
3.
Remove
Transport Tab
Insert
[A]
.
Step 3
Connect Power to Printer
1.
Main Power Switch should be
turned OFF.
2.
Power cord plugs into receptacle
[1].
(
Located just below the power
switch
.)
Connect Printer to Computer
USB cable from computer plugs into
the P
rinter’s USB port [3].
Network port
[2]
.
Unwinder Interconnect port
[4].
(
Located just below the USB port
.)
DO NOT CONNECT USB CABLE OR
NETWORK CABLE YET.
DO NOT TURN PRINTER POWER
SWITCH YET
.
AstroJet
TM
M1C
Quick Start Guide
