3.
Put your MixAmp Pro Into PC Mode. To do this, hold down the power button on the
MixAmp TR for 3-5 seconds. You will see the power buttons LED light illuminate
from red to white.
4.
Next, Right click the speaker icon in your task bar and select “Playback devices”:
•
If your computer features an optical output, locate the digital optical output and set
this as your default device. Right click the device and navigate to Properties >
Supported formats. Ensure that Dolby Digital Live is enabled and DTS is disabled, if
featured, and that the sampling frequency is set at 48.0 kHz.
•
If your computer does not feature an optical output and you’re using only the USB
cable to connect, locate the ASTRO MixAmp Pro and set as default device.
6.
Connect your A40’s to your MixAmp TR by plugging the Inline mute cable into the
headset, and the other end of the cable into the port on the MixAmp TR with the
headset icon. You are now ready to use your A40 TR System on your Computer.
How to set up your A40 TR on your PS4.
youtube.com/watch?v=FZkzqoFc7XM&t
Required components:
•
A40 TR Headset
•
MixAmp TR
•
USB Power Cable, Optical Cable, and A40 Inline Mute Cable
1.
First, ensure the MixAmp TR has the most recent Software installed
here:
astrogaming.com/firmware/firmware.html
Ensure the MixAmp TR is connected
to the USB Port on your PC in order to update it on your PC through the ASTRO
Command Center. (Video Pending)
2.
Connect the MixAmp TR to your PS4. Insert the MixAmp TR USB Power cable to the
front USB Port and connect the Optical cable to the MixAmp TR USB port and PS4
optical connection located on the rear. (Video Pending)
3.
Next turn on your PS4 and wait for it to load to the home screen.
4.
Go into the "Settings" tab on your top bar of your PS4 home screen. Go to -->"Settings" --
>"Sound and Screen"--> "Audio Output Settings"-->"Primary Output Port"-->"Digital
Out(optical)"--> then check Dolby Digital 5.1 ch then hit OK.
Under the "Audio Output Settings" menu select "Output to Headphones" and make
sure "Chat Audio" is selected and not "All Audio".
Also under the "Audio Output Settings" menu select "Audio Format (priority)"
and make sure "Bitstream (Dolby)" is selected and not "Linear PCM"
6.
Connect your A40’s to your MixAmp TR by plugging the Inline mute cable into the headset,
and the other end of the cable into the port on the MixAmp TR with the headset icon. (Video
Pending). You are now ready to use your A40 TR System on the PS4.