Astria Ladera-BK, Инструкция по установке и эксплуатации

Страница: 1 / 28

EPA Wood-Burning Fireplace
P/N 900113-00 REV. B 03/2015
Ladera-BK
MODELS
Ladera™
INSTALLATION AND
OPERATION INSTRUCTIONS
SAVE THESE INSTRUCTIONS
FOR FUTURE REFERENCE
This installation manual will enable you to obtain a safe, efficient
and dependable installation of your fireplace system. Please read
and understand these instructions before beginning your installation.
Do not alter or modify the fireplace or its components under any cir-
cumstances. Any modification or alteration of the fireplace system,
including but not limited to the fireplace, chimney components and
accessories, may void the warranty, listings and approvals of this system
and could result in an unsafe and potentially dangerous installation.
IHP wood-burning fireplaces are designed for use as a supplemental
heater. They are not intended for continuous use as a primary heat
source.
Listed to standards:
ULC-S610 and UL-127
Report # 14-181
EPA Cert. No. 706
WARNING
• The fireplace cannot be operated without a door
or firescreen. Consult your dealer to select the
correct replacement door or firescreen.
• The fireplace is equipped with a blower, electri -
cal connection must be made prior to fireplace
installation
• Important! To assure proper alignment of glass
doors: Install this fireplace in a square and
plumb condition, using shims as necessary at
sides and/or bottom.
• Install the fireplace only as described in these
instructions.
WARNING
• Hot! Do not touch! The glass and
surfaces of this appliance will be hot
during operation and will retain heat
for a while after shutting off the appli-
ance. Severe burns may result.
• Carefully supervise children in the
same room as appliance.
• If small children are present in the home, it is
recommended that this appliance be fitted with
an adjustable safety gate or barrier screen.
A French manual is available upon request. Order P/N 900114-00.
Ce manuel d’installation est disponible en francais, simplement en faire
la demande. Numéro de la pièce 900114-00.
P900113-00
C US