Operation
900285-01 05/2015
Innovative Hearth Products
Astria
TM
Gemini and GeminiCD Series Direct-Vent Gas Fireplaces
59
NOTE:
Installing the 33” and 35” logs
The logs have notches/tabs to assist proper positioning. Upper logs rest on lower logs via notches/tabs. Proper log
placement is critical to prevent sooting. Place the logs in the gaps between flame peaks, so they do not impinge the
flames. Follow the log placement instructions precisely.
NOTE:
Do not cover the burner ports.
Table 38: 33” and 35” Log Set
3
4
2
Log Number
Description
1
Rear Left Log*
2
Center Log
3
Right Front Log
4
Left Front Log
Catalog number for the entire set:
33”: F2191
35”: F2192 for Gemini 35” Series
*The Gemini 33” Model does not include a Rear Rear Log. Disregard for 33” Model.
1.
If necessary, remove the glass door (
Page 61
). Locate left and right placement brackets (
Figure 50
).
2.
Bend up the log placement brackets (
Figure 50
). Place embers and other media (see
Page 58
).
Figure 50: Locating the log placement brackets
Figure 51: Placing logs 1 and 2
2
3.
Align the notches in the Rear left log (1) with the Rear left brackets (
Figure 50 and 51
) in 35” units ONLY.
4.
Position the Center Log (2) on the right rear log placement brackets in 33” and 35” models (
Figure 50 and 51
).
Figure 52: Placing log 3
Figure 53: Placing log 4
3
4
5.
Position the right front log (3) on the grate and the right side of the the center log (2) (
Figure 52
).
6.
Position the left front log (4) on the left of the center log (2) and right log front log (3) against the grate
(
Figure 53
).
1
Rear Left and Rear Right Log Placement Brackets
Front Left Log Placement Bracket
Burner Slots
Do Not Obstruct
