12
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
Installing the StarLiteLX Series Log Set
The logs have notches/tabs to assist proper positioning. Upper logs rest on lower logs via notches/tabs. Proper log placement
is critical to prevent sooting. Place the logs in the gaps between flame peaks, so they do not impinge the flames. Follow the log
placement instructions precisely. NOTE: Do not cover the burner ports.
Table 6 - Log Set
I.D.
No.
Description
1
Rear Log
2
Middle Log
3
Right Front Log
4
Front Left Log
5
Top Right Log
6
Middle Twig Log
7
Top Rear Log
8
Top Left Log
1. Place rear log (1) being pilot in-between the tube burner. (Figure 15)
2. Place middle log (2) directly in front of tube burner (Figure 16).
3. Place front right log (3) onto grate. The notch on the "charred section" will fit around the grate(Figure 17).
4. Place front left log (4) onto grate. The notch on the "charred section" will fit around the grate (Figure 18).
Top
View
Top
View
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
Figure 15 - Place Rear Log (1)
Figure 16 - Place Middle Log (2)
Figure 17 - Place Front Right Log (3)
Figure 18 - Place Front Left Log (4)
1
2
1
3
4
1
2
2
1
3
Front View
Front View
Pin for Log 7
Square Protrusion
for Log 7
Square Protrusion
for Log 8
Round Protrusion
for Log 5
Square Protrusion
for Log 5
