Astralpool Pulit E90, Инструкция пользователя

Страница: 6 / 40

6
English
Turning on the Pulit E90 on
Part 3 – Taking the Pulit E90 out of the water
Unplug power supply before any servicing activity.
If the Pulit E90 has not finished its cycle, turn off the power supply 1.
unit and unplug the mains.
Pull the floating cable gently until the Pulit E90 has risen to the 2.
surface, then lift by the handle.
Plug the floating cable from the pulit E90 1.
into the power supply unit.
Plug the electrical cable from the power 2.
supply unit into the mains.
Press the ON/OFF switch on the power 3.
supply unit.
The Pulit E90 will now start to work. 4.
Important: Do NOT lift the Dolphin from the water by its cable.
Floating cable
On/Off
switch
ON