Astralpool HALO DOSER, Руководство по установке

Страница: 4 / 12

4
HALO ® DOSER ™
Installation Manual
Section 1. Important Safety Instructions
READ AND FOLLOW ALL INSTRUCTIONS
When installing and using this electrical equipment, basic safety precautions should always be followed, including
the following:
SAVE THESE INSTRUCTIONS
WARNING
The Halo Doser has an IP23 rating, meaning it is suitable for installation outdoors. For safe operation the Halo Doser must be
installed in the correct orientation, with the cable leaving from the bottom of the device. AstralPool strongly recommends
that installation be performed by a registered pool builder, electrician or other suitably qualified person.
CAUTION
When mixing acid or other chemicals with water, ALWAYS ADD THE ACID OR CHEMICALS TO WATER. NEVER ADD WATER TO
THE ACID OR CHEMICALS.
Some helpful considerations may include:
• Choosing plants that can withstand splash out of pool water containing chlorine and/or salt and other water purification
chemicals.
• All metal components used in and around a pool should be of a high grade, quality stainless steel.
• Careful selection of masonry products. The porosity and hardness of natural stones varies greatly. Therefore we
recommend you consult with your builder or stone contractor on the best choice for stone materials around your pool or
spa.
• Sealing all masonry products. Professionals in the stone industry specify that even natural stone, especially when
used outdoors, be sealed to prevent weathering, staining, and premature degradation. Consult with your stone or deck
contractor for the proper sealer for the masonry products you have selected to use around your pool or spa.
• For the optimal results, sealers should be reapplied on a regular basis. Reapply the protective sealer on a schedule per the
manufacturer’s instructions.
• Use of chemicals other than those recommended may be hazardous. Follow the chemical manufacturers instructions.