A S T R A L P O O L – V C 1 0 - S L X S E T - U P & O P E R A T I O N M A N U A L
SET-UP AND
OPERATION MANUAL
AQUA-QUIP POOL LIGHTS
9
Select a name for Lighting Zone 2 (if needed)
If the lights for Zone 2 are Multi-Colour,
then check the “Zone supports multi-colour
lighting” box.
Press
NEXT.
8
Select a name for Lighting Zone 1.
If the lights for Zone 1 are Multi-Colour,
check the “Zone supports multi-colour
lighting” box.
Press
NEXT.
7
Select the number of lighting zones in your
installation (maximum = 4).
Then Press
NEXT on the next 4 screens (as
they are unrelated to Lighting Setup), until
you reach the “Set Up – Channel 1 screen”.
Depending on what equipment is connected
and allocated to the various channels in your
installation, keep pressing
NEXT until an
available (unused) Channel is displayed.
If you want to control lighting zones
independently (example: the pool is Blue and
the spa is Green) then you will need a separate
transformer per zone.
Each transformer will plug into an available
(unused) Channel on the Viron Connect 10.
If you have just one transformer, then all lights
connected to that transformer will display the
same colour.
Press
NEXT.
10
Select
SLX.
Press
NEXT.
2
