3.INSTALLATION AND CONNECTION
In order to provide our customers with quality, reliability and versatility, this product has been made to strict
production standards. This manual includes all the necessary information about installation, debugging,
discharging and maintenance. Please read this manual carefully before you open or maintain the unit. The
manufacture of this product will not be held responsible if someone is injured or the unit is damaged as a result of
improper installation, debugging, or unnecessary maintenance. It is vital that the instructions within this manual are
adhered to at all times. The unit must be installed by
qualified personnel.
The unit can only be repaired by qualified installer center personnel or an authorized dealer.
Maintenance and operation must be carried out according to the recommended time and frequency, as stated in this manual.
Use genuine standard spare parts only.
Failure to comply with these recommendations will invalidate the warranty.
Swimming Pool Heat Pump Unit heats the swimming pool water and keeps the temperature constant. For split type unit,
the indoor unit can be Discretely hidden or semi-hidden to suit a luxury house.
Our heat pump has following characteristics:
1
Durable
The heat exchanger is made of PVC & Titanium tube which can withstand prolonged exposure to swimming pool
water.
2
Installation flexibility
The unit can be installed outdoors or indoors.
3
Quiet operation
The unit comprises an efficient rotary/ scroll compressor and a low-noise fan motor, which guarantees its quiet operation.
4
Advanced controlling
The unit includes micro-computer controlling, allowing all operation parameters to be set. Operation status can be
displayed on the LED wire controller. Remote controller can be chosen as future option.
INTRODUCTION
Congratulations on the purchase of an Astral Pool Heat Pump, Pool and Spa Heater. Proper installation and service of your
new heating system and correct chemical maintenance of the water will ensure many years of service. It is equipped with
features that take advantage of new technology developed exclusively by Astral Pool.
This unit can safely be connected to PVC pipe. In addition, the unit is equipped with an accurate electronic thermostat to
ensure ease of use and accurate temperature control. The electronic display tells at a glance the operational status of the
heater.
Your heat pump works by extracting heat from the surrounding air. The heat pump works most efficiently in warm weather.
So, it is best to operate the heat pump during the warmest part of the day rather than overnight or early in the morning.
It is important to ensure an adequate supply of air and to avoid recirculation of the cooled air exiting the top of the unit. For
this reason, the heat pump should not be installed in confined spaces and must have a minimum of 500 mm clearance
above it and 700 mm clearance to the sides and 300 mm to the rear. A clearance of 2500mm is required to the front of the
unit to allow access to the controls and service panel.
Although the unit is weatherproof, it is recommended some protection from the harsh effects of direct exposure to the
elements be provided.
The heat pump
must
be installed outdoors on a level concrete pad.
In most circumstances where heating is required, the heat pump will need to run longer than the filtration. For the most
effective heating it may be necessary to install a small pump to circulate water through the heat pump independent of the
filtration system. Since the heat pump uses electricity so efficiently, it is a pity to waste electricity running an oversized
pump. For this reason, the small added cost of a dedicated pump can be recouped and a great deal of energy saved over
the life of the heater.
Note:
The appliance is not intended for use by young children or infirm person without supervision. Please ensure that young
children are supervised to ensure that they do not play with the appliance.
1
Содержание 78542
Страница 19: ...Operation and use 16 ...
