Astral Pool 67515, Руководство по установке и обслуживанию

Страница: 3 / 20

3
5. MAINTENANCE:
This lamp does not require any type of maintenance work. If you notice that the lamp is not working properly, please
contact our customer attention service.
THIS PRODUCT DOES NOT CONTAIN ANY ELEMENTS THAT CAN BE HANDLED, DISMANTLED OR REPLACED
BY THE USER. IT IS FORBIDDEN TO ACCESS INSIDE THE PRODUCT, OTHERWISE THE GUARANTEE OF THE
PRODUCT WILL BECOME INVALID.
6. ELECTRICAL CONNEXION
MONOCOLOR LAMPS (see diagram page 15)
The electrical connection of the monocolour lamps consists solely in turning the system on and off.
7. SAFETY WARNINGS:
• Avoid making contact with the electric voltage.
• Comply with the current standards regarding accident prevention.
• In this regard, the IEC 364-7-702 standards must be observed: WIRING IN BUILDINGS SPECIAL WIRING SWIM-
MING POOLS.
• This lamp is suitable for use in seawater unless projector specifications state otherwise.
• All maintenance operations should be performed with the lamp disconnected from the Mains.
• Do not handle with wet feet.
• The lamp is designed to operate ONLY IN WATER SUBMERGED and connected to a SELV type power supply that
complies with the 61347-2-13: 2014 standard.
• The PAR56 lamp of LEDs withstands to the treatments of swimming pool described next as long as the values of
concentration do not surpass the following values:
TYPE OF TREATMENT CONCENTRATION IN WATER
Chlorine 2 mg/l
Bromine 5 mg/l
Salt electrolysis (Na Cl) 6 g/l
Attention: Please note that the Ph of pool water always must be between 7.2 and 7.6.