Astra GAMP-2000, Справочное руководство

Страница: 8 / 44

4
Care and warnings for safe operation
The user must observe the precautions and warnings in this manual during all phases of installation,
service and repair of the product. Failure to follow these precautions and warnings violate the safety
standards of design, manufacture and planned usage of the product.
AstraYacht srl declines any responsibility for failure by the user of the precautions and warnings given
in this manual.
The safety precautions listed below represent some warnings AstraYacht srl knows. The user shall
observe these warnings and every other precaution is necessary to the proper functioning of the
product, even if not expressly stated in this manual.
Prohibition on the use in explosive environments
ATTENTION!
You may not use the equipment:

Inplaces with the presence of toxic substances, gases or flammable liquids and/or explosives

in pros itself of heat sources and naked flames
Precautions antistatic propeties
ATTENTION!
In order to prevent irreversible damage due to ESD (electrostatic discharge), it's a good idea to take
all the necessary precautions (e.g. use a grounded wrist strap) before handling the equipment.
Input supply connection and other equipment
DANGER!
Failure to observe the following precautions may result in damage, fire or electric shock, with
possible serious injuries.

To avoid personal injury, always disconnect the power and discharge equipment circuits
before touching the latter

Use a power supply whose voltage and frequency correspond to those indicated on the
label of the appliance. In case of doubt contact support AstraYacht Technician (see third
and fourth of the cover of this manual for more details) or Manager for electricity

Before making connections to other equipment to read the instructions for use of the same
equipment

Always unplug the power to the equipment before making connections or disconnections

Do not attach/detach operations with damp or wet hands

Before using the appliance check that the power cables and connection are not damaged,
knotted or crushed

Do not route the power cables and connection through areas where they can be crushed or
damaged

Supplying power to the equipment only after having performed and checked all connections,
avoiding overruns

Do not tamper with the power connections.