esa before the start creates specific targets, reducing those from yard polar for a predefined percentage, accounting
that in this phase the performance are slightly lower. With these new target and the distances provided by esa, the time
needed to reach the ends of the starting line.
TIME EXTIMATION METHOD:
Main Screens: STARTING PROCEDURE
(3/3)
P
S
C
54
.0
m
0:45
73
1:03
pag. 16
If, in the point in which the boat is, is impossible to reach directly one of the ends of the starting line, sailing in strict
bowline, the time indication text is replaced by “OUT”.
Also in this way you obtain the indication that you are behind the lay line for the end in question, therefore is
necessary to veer at least one time to reach the end itself.
Note well: esa does not take count of veer time, for reach the point S, boats on point C in figure, the indicated time will be the same for
each boat, but for the read one one more veer will be needed, and consequently more time will be spent for reach the point
pag. 16
C
DISTANCE TO LINE
54
.0
m
54
4:09
0:45
1:03
