7.
Check status LEDs
a.
Place the AT210 (or AE004 GNSS antenna) somewhere with reasonable view of the
sky in correct orientation for a minute or two and then check the status LEDs as
below:
GNSS status
GSM status
External power
a.
During normal operation the LEDs should:
a.
GNSS
double flash once per second
b.
GSM
single flash every 2 seconds
c.
POWER
stays on constantly
8.
Slide the AT210 assembly into the enclosure
a.
Note that the GNSS antenna faces the top of the enclosure (with the slots)
b.
Ensure that the PCB is aligned with the guide slots inside the enclosure and carefully
push in until the clips snap together