Secure Inner Leg
1.
(SEE FIGURE 3)
Working on any two
adjacent
legs, lift the gazebo frame (A)
and slide out the inner sliding legs until
the push "snap" button engages the
hole in the bottom of the outer leg.
2. Repeat for the other two legs.
Figure 3
Secure Lower Legs
1.
(SEE FIGURE 2)
Secure the lower sliders
on each corner by holding the top leg
down with one hand while moving the
slider up with the other until the push
"snap" button engages the hole in the
slider.
2. Repeat this process to secure all
four corners.
Figure 2
DISASSEMBLY INSTRUCTIONS
Remove Ground Stakes
1.
(SEE FIGURE 6)
Remove all ground
stakes (D) and anchor
ropes (C)
securing gazebo (A).
2
3
Install Gazebo Ground Stakes
1.
(SEE FIGURE 5)
Secure the gazebo in
position by driving ground stakes (D)
through the foot of each of the legs.
2. Attach one end of the anchor ropes (C)
to the top corner "D" rings of the gazebo
and to a ground stake (D) in the other.
Unhook Leg Cover
1.
(SEE FIGURE 6 & 7)
Unhook the leg cover
fabric, lower end hooks from holes in
lower legs.
ASSEMBLY INSTRUCTIONS
CAUTION:
Do not tug or pull canopy cover
and frame from side (area between corner
legs). Do not force canopy frame open.
Always open canopy by grasping corner leg
as described below:
Open Canopy Frame
1.
(SEE FIGURE 1)
Place the canopy frame
with cover (A) in center
of area to be covered.
2. Grasp one leg of canopy frame (A). Move
leg outward, away from center. Continue
working around canopy, moving each leg
a little at a time until canopy frame with
cover is fully extended.
Figure 1
A
Corner
Leg
Canopy
Side Area
Secure Leg Cover Fabric
1.
(SEE FIGURE 4)
Secure the leg cover
fabrics' lower ends to the legs by
hooking the clip into the hole in the
bottom of the legs.
Figure 5
C
D
D
Figure 6
C
D
D
Figure 4
