CAUTION:
Do not over tighten the
mounting hardware.
Attach Right Lounge Arm
1.
(SEE FIGURE 2)
Place seat front and
back combination (A, B) on top of right
lounge arm (D).
2. Align seat mounting tabs with lounge
arm mounting holes.
3.
(SEE FIGURE 3)
Attach front of seat to
lounge arm using two short bolts (F)
and two metal washers (J). See Detail A.
4. Attach back of seat to lounge arm
using two short bolts (F) and two metal
washers (J). See Detail B.
Attach Left Lounge Arm
1.
(SEE FIGURE 2)
Place left lounge arm (E) on top of seat front and back combination (A, B).
2. Align seat mounting tabs with lounge arm mounting holes.
3.
(SEE FIGURE 3)
Attach front of seat to lounge arm using two short bolts (F) and
two metal washers (J).
4. Attach back of seat to lounge arm using two short bolts (F) and two metal washers (J).
Install Plastic Bolt Caps
1.
(SEE FIGURE 3)
Place one plastic bolt cap (L) on ends of each short bolt (F).
D
Figure 2
A/B
Seat Mounting
Tabs
Lounge Arm
Mounting Holes
Figure 3
F
J
L
L
F
J
Lounge Arm
Mounting Holes
Seat Mounting
Tabs
Detail C
Backrest to Seat
G
H
J
K
L
M
N
Attach Backrest to Seat
1.
(SEE FIGURE 4)
Place lounge in the upright position .
2. Attach backrest (C) to seat front and back combination (A, B).
3 Place one metal washer (J) onto long bolt (G). Slide bolt through mounting hole
on seat back combination. See Detail C.
4. Place one plastic washer (K) onto bolt (G), then slide bolt through mounting hole of backrest (C).
5. Place one metal washer (J) onto bolt and secure to backrest using hex nut (H).
6. Tighten hex nut (H) using hex wrench (N).
Note:
Tighten Nut (H) snug, then loosen 1/4 turn or more to allow free movement of Backrest (C).
7. Install plastic nut cap (M) onto hex nut (H).
Attach Lounge Chair Cushion
1.
(SEE FIGURE 4)
Attach lounge chair cushion (P) to lounge using the attached velcro straps.
Figure 4
C
Seat Back
Combination
Backrest
J
D
F
J
L
Detail A,
Front of Seat
L
F
J
L
F
J
Detail B,
Back of Seat
F
J
L
L
F
J
2 places
E
E
D
2
3
G J
L
K J H M
P
A/B
