ASSEMBLY INSTRUCTIONS
1. (SEE FIGURE 1) Place table top (A)
upside down on a non scraching surface.
4. (SEE FIGURE 4) Turn the assembled
table right side up.
Note:
All four legs should sit flat.
If the table rocks, you have
the leg assemblies mounted
in reverse order. If so, repeat
step 2 reversing the placement
order of the legs.
A
B
C
D
Figure 2
Figure 3
Figure 4
Figure 1
A
A
B
A
D
D
PARTS & HARDWARE LIST
PART #
DESCRIPTION
QUANTITY
A
1
Table Top
B
1
Leg Assembly Part 1
C
1
Leg Assembly Part 2
D
4
Wing Nut
E
1
Plastic Center Hole Bushing
E
2
. (
SEE FIGURE
2) Turn leg assembly (B)
upside down so that holes at the top
of assembly slide onto the threaded
studs premounted underneath
table top (A).
Attach the wing nuts (D) to threaded
studs and tighten securely.
3
. (
SEE FIGURE
3) Slide the plastic
center hole bushing (E) onto the
center hole ring of leg assembly (C)
repeat step 2 with leg assembly (C).
The center support holes should fit
flush together.
Attach the wing nuts (D) to the
threaded studs and tighten securely.
E
C
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER.
CONTACT CUSTOMER SERVICE AT
1-888-424-3354.
Carefully remove the contents from the package. If any parts are missing do not
attempt to use the product until they have been obtained and correctly installed.
NOTE:
This product is intended for residential, non-commercial use.
CAUTION:
Do not over tighten fasteners.
1
2
