IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER. CONTACT CUSTOMER SERVICE AT
1-888-424-3354.
Carefully remove the contents from the package.
If any parts are missing do not attempt to use the product until
they have been obtained and correctly installed.
G
H
I
ASSEMBLY INSTRUCTIONS
Caution: Do not over tighten fasteners.
2. Attach the remaining 2" wood slats (B) in
a the same manner.
3. (SEE FIGURE 2) Ensure the bench is square
(90 degrees to the floor) and tighten all slats
securely.
4. (SEE FIGURE 3) Turn the bench over on a
non-scratch surface and attach middle
support bracket (D) to the slats at the
midway point between leg & arm braces
(C) using wood screws (I). Work from the
top to bottom, bending bracket (D) as
necessary to fit the contour of the bench.
5. (SEE FIGURE 4) Attach the side brackets (E)
to the leg & arm braces (C) using bolts (F)
washers (G) and nuts (H). Align the other
end of brackets (E) with the center of a wood
slat and fasten with wood screws (I).
6. Ensure all fasteners are securely tightened.
1. (SEE FIGURE 1) Using Bolts (F) washers (G)
and nuts (H) attach one end of a 2" wood
slat (B) to the middle of cast iron leg & arm
brace (C). Attached the other end of the
same slat to the second leg & arm brace (C).
Attach 2 of the 1-1/2" wood slats (A) to the
top of leg & arm brace (C) and 1 to the
bottom.
PARTS & HARDWARE LIST
PART #
DESCRIPTION
QUANTITY
A
3
Narrow Wood Slats
B
9
Wide Wood Slats
C
2
Cast Iron Legs & Arm Brace
D
1
Side Brackets
Middle Support Bracket
E
2
6mm x 32mm Bolt
F
26
6mm Washer
G
26
6mm Nut
H
26
Phillips Wood Screw
I
14
A
B
C
D
E
F
FIGURE 1
FIGURE 2
FIGURE 3
FIGURE 4
C
C
F
G
H
B
A
A
D
I
E
I
H
F
90˙
G
A
C
C
C
