ASSEMBLY INSTRUCTIONS
PARTS & HARDWARE LIST
PART #
DESCRIPTION
QUANTITY
A Table
Top
1
B Table
Legs
4
C
Lower Center Support
1
D
Upper Center Support
1
E Bolt
8
F Nut
8
G Hex
Key
1
H Wrench
1
I Bolt
Cap
8
J Nut
Cap
8
1. (FIGURE 1)
Place the table top (
A
) upside
down on a flat non-scratch surface. Insert
table legs (B) into guides in the corners of
table top (A).
A
B
C
D
E
F
G
H
2. (FIGURE 2)
Place the upper center support (D)
in between table legs (B) and secure with
bolts (E) and nuts (F) using hex key (G) and
wrench (H). Repeat for lower center support (C).
Carefully remove the contents from the package. If any parts are missing do not
attempt to use the product until they have been obtained and correctly installed.
Parts Detail
2
CAUTION:
Do not over tighten fasteners.
3
. (FIGURE 3)
Carefully turn table upright and
tighten fasteners in a cross corner fashion to
level the table.
4. Apply bolt covers (I) and nut covers (J) to
exposed bolts (G) and nuts (H).
1
NOTE
: This product is intended for residential, non-commercial use.
I
Figure 1
Figure 2
Figure 3
A
E
F
B
B
J
D
C
J
I
