TABLE RIM WITH GLASS
1
A
UPPER LEG
1
B
LOWER LEG
1
C
ST4*16
4
D
Figure 3
LEG RECEIVER
CAUTION
：
Do
not
over
tighten
hardware
and
fasteners
Step 1:
With the help of another person,
place tabletop upside down on a
non-abrasive to avoid scratching
the top of the rim or glass. Identify
the upper leg and lower leg. Insert
the lower leg into upper leg.
Step 2:
Note the leg receivers in the table
rim. These leg receivers slide. If
necessary, adjust the leg receivers
into the proper position as shown
in drawing below. Also, if
applicable, position the flat plastic
supports so they are evenly spaced
within the table rim.
Step 3:
Insert the four legs into the leg
receivers bysnapping firmly into
place. Ensure all the legs
are secured in the leg receiver.
Then do the Fig.3. Use the ST4*16
to fix up the legs and leg receiver.
Turn the table in upright position.
The table is now ready for use.
NOTE
：
This
product
is
intended
for
residential
，
non
－
commercial
use
．
