PARTS LIST
PART #
DESCRIPTION
QUANTITY
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER.
CONTACT CUSTOMER SERVICE AT
1-888-424-3354
Carefully remove the contents from the package. If any parts are missing do not
attempt to use the product until they have been obtained and correctly installed.
ASSEMBLY INSTRUCTIONS
A
Roof
1
B
Bottom, Well
1
C
Pump
1
D
Water Bucket
1
E
Roof Support
2
F
Side Support, Bucket
1
G
Side Support
1
H
Mock Handle
1
J
Dowel
1
K
Hex Nut 6mm
4
L
Washer 6mm
8
M
Bolt 6 x 75mm
4
N
Wood Screw 3.5 x 30mm
6
P
Wood Screw 3 x 16mm
4
Q
Plastic Tubing
1
Figure 1
CAUTION: Do not overtighten fasteners.
Attach Side Supports to Bottom, Well
1.
(SEE FIGURE 1)
Place bottom, well (B)
on flat surface.
2. Align side support, bucket (F) with
predrilled mounting holes at top of
bottom well (B).
3. Insert bolt (M) through side support, bucket.
Place washer (L) onto bolt (M) and secure
support using hex nut (K).
4. Align side support (G) with predrilled
mounting holes at top of bottom, well (B).
5. Insert bolt (M) through side support (G).
Place washer (L) onto bolt (M) and secure
support using hex nut (K).
Attach Roof Supports to Side Supports
1.
(SEE FIGURE 2)
Place dowel (J) between
the two roof supports (E) and press into
exisitng mounting holes.
2. Insert one roof support (E) into mounting
bracket of side support, bucket (F) and
the other roof support into mounting
bracket of side support (G). Secure roof
supports (E) to side support brackets
using four small wood screws (P).
3. Attach mock handle (H) to side support (G),
using two large wood screws (N).
NOTE: This product is intended for residential, non-commercial use.
Parts Detail
2
A
B
C
D
E
F
G
H
J
K
L
M
N
P
Figure 2
Figure 3
B
F
G
M (4 places)
K
L
E
E
J
N
H
Mounting
Bracket
P (4 places)
F
G
A
E
E
N
N (4 places)
D
F
Bucket Supports
(Part of Side
Support, Bucket)
Install Water Bucket
1.
(SEE FIGURE 3)
Attach plastic tubing (Q)
to bottom of water bucket.
2. Hang bottom of water bucket (D) on
bucket supports. Tie rope from top of
bucket handle to dowel (J). Adjust
length of rope as needed.
Attach Roof to Side Supports
1.
(SEE FIGURE 3)
Align roof supports (E)
with sides of roof (A). Attach each roof
support using two large wood screws,
(N) for each support.
Q
3
L (4 places)
L (4 places)
K (4 places)
M
L
Q
J
