Astone UMPC CE-260, Руководство пользователя

Страница: 71 / 100

Connecting to Peripherals
5
71
+
The USB bus distributes 0.5 amps (500 milliamps) of power through each
port. For the purpose of power saving, please disconnect your USB device
while not in use.
5.2 Using an External DVI-I Port
Your UMPC has a DVI-I port for supporting any external CRT or LCD color
monitor. You need a display signal cable (usually provided with the monitor).
One end of the cable must have a 24-pin connector for the system. All you
have to do is plug the cable from the monitor into the left of the system with a
DVI-I Socket.
To connect an external monitor:
1. Turn off your computer and make sure the monitor power switch is
turned off.
+
The UMPC must be powered off or suspended while the monitor is being
connected. Although you can connect the external Monitor without power
off the UMPC and the external monitor, however, it is harmful to both
devices and it shortens the life of these devices.
2. Connect the connector cable of the monitor to the DVI port at the left of
your UMPC (If connector cable is VGA port, please make sure with using
the DVI-VGA Adapter). Secure the cable connection with the screws
provided.
+
Most monitors use a VGA cable to connect to a PC. In this case, you can
connect the VGA cable from the monitor to the DVI-I Socket on the left of
your UMPC via a DVI-VGA Adapter. Or you can connect directly to the
monitor with DVI socket.